Brick Paver Installation & Edging



Staging of material

Most paver jobs will vary depending on access, website conditions, project size and of course, the weather condition. Careful factor to consider needs to be taken to identify the time to begin the paver installation.

The foreman or job supervisor ought to constantly have the materials (sand/ pavers) dispersed around the task site for effective and easy setups. Paver pallets/bundles should be positioned in a way not to interfere with the paver installation. The appropriate pallet/bundle placement can make the real project installation simpler and quicker by reducing the general labor of managing the material.

Brick paver patterns

Pavers can be put in several patterns depending on their shape. Each paver shape will normally have numerous different hatch patterns that are offered by the maker.

The laying pattern and shape of the paver is extremely vital to the performance of the application. Professionals have to take into consideration the traffic weight loads on their paver jobs. 90 or 45 degree herringbone patterns are advised in all street and driveway applications, as these patterns will offer the optimum load support needed and will withstand sneaking from the turning of tires and starting or braking of automobile traffic. In most applications worldwide, it has actually been revealed that pavers laid in a herringbone pattern have performed sufficiently.

Pavers that are 60 mm (2 - 3/8 in) density appropriate for pedestrian applications. Pavers that are going to be used in commercial or industrial applications must be 80 mm (3 - 1/8 in) in density.

Reference/starting point for brick paver installation

There are a number of conditions that determine the starting point of a paver job.

When beginning to set up pavers it is best to snap a true straight chalk line on the surface of the bedding sand or pull a true straight string line above the surface area of the bed linen sand at the ended up elevation of the pavers This will help as a guide for maintaining straight joint lines and will also enable the installer to make changes in the positioning of the pavers.

Buildings and concrete curbing are typically not straight and must not be utilized for developing straight joint lines. Making use of string lines is essential to identify the true straightness of the edge also. As the paver installation progresses, the string lines will assist decrease the requirement for small trim pieces.

These will preserve a minimum joint width and enable the bedding and jointing sand to go into between each paver. Pavers with spacer bars are typically not laid in snug versus each other considering that a string line will supply consistent joint spacing.

Installation of brick pavers.

One of the most commonly used techniques for the installation of pavers is hand installation of each paver. It is best to set up a single row of pavers along among the true straight lines that you have actually pulled or above the bedding sand. This will give you a real and straight line off which to work. When this row is developed, you can continue to work external into the field with the remainder of the pavers. Constantly make certain to occasionally examine your joint lines to make sure they are real and straight. If not, changes to the pavers can be made as you continue setting up. Pavers needs to be set up hand tight. The very best approach is to put a paver versus another one and let it move down into the bedding sand. Do not kick or tap the pavers into place as this can throw your lines out of true straightness.

When setting up pavers on a high grade, they must be set up at the base of the grade going uphill. This will avoid the pavers from creeping as they are being laid.

The best way for setting up pavers on big jobs is to install them mechanically. There are a couple items a professional should consider prior to setting up pavers mechanically:

1.) Mechanical installers are only efficient in installing pavers in particular patterns.

2.) The specialist needs to make certain that the producer can production and bundling pavers in the preferred pattern on the pallets for easy mechanical installation.

Poor color blending might result in a patchy looking installation. Many makers are consistent with color blending on each bundle of pavers, however it is the professional's obligation to ensure proper mixing in the field.

Cutting treatments for brick pavers.

Professionals generally have 2 methods of cutting pavers. When cutting pavers wet, it will assist lessen dust and will prolong the diamond blades life. The operator of the brick saw need to constantly cut the pavers away from the surface of the paver field when cutting damp, due to the truth that the pavers will create a slurry that will stain the paver surface.

The brick saw operator should constantly wear the proper security that is needed for running a saw, such as eye, ear, breathing and hand protection ).

Edging types

Edge restraints play a major function in the total success of an interlocking pavement installation Edging restraints remove lateral motion of the pavers and hold the pavers securely together. Specifically at the external perimeter of the paver application, without an edging restraint, your project is ensured to stop working with time.

Generally manufactured edge restraints are the most commonly utilized by specialists. Produced edging restraints can range from, plastic edging, steel and aluminum, woods or precast concrete and stone.

Edging installation.

This might result in the migration of the bedding sand and ultimate lateral motion of the pavers. If there is a possibility of losing bed linen sand between the pavers and the edge restraint, then geo textile material is advised. When a gap in between the pavers and the edging exceeds 3/8" (10mm), then the area must be filled with cut pavers.

Compaction of brick pavers.

After installation, the pavers need to be compressed. The entire area that is to be compressed ought to be swept tidy of any foreign items and debris that can trigger scratching or scuffing on the surface of the pavers.

It is important to have a compactor that can apply in between 3000lbs. And 5000 lbs. Of centrifugal compaction force. In addition, it is essential that the very first compaction happens before any jointing sand has actually been applied to the pavers. If jointing sand is applied to the pavers before compaction takes place, this can cause a bridging issue and will not enable the joints to be entirely filled with Patio Pavers West Palm Beach jointing sand. This can also avoid the pavers from being correctly set into the bed linen sand.

When compacting the pavers, it is recommended that you make at least 2 passes in different instructions across the pavers. This will enable the pavers to be properly embeded in the bedding sand and will require the bedding sand up into the joints from the bottom of the pavers.

The compaction of the pavers is extremely critical to the final efficiency of the pavers. Failure to do appropriate compaction can lead to deformations and pavement failure with time.


Paver pallets/bundles ought to be positioned in a manner not to interfere with the paver installation. One of the most commonly used approaches for the installation of pavers is hand installation of each paver. The operator of the brick saw ought to constantly cut the pavers away from the surface of the paver field when cutting wet, due to the reality that the pavers will create a slurry that will stain the paver surface area. Edging restraints eliminate lateral motion of the pavers and hold the pavers tightly together. When a gap in between the pavers and the edging surpasses 3/8" (10mm), then the area ought to be filled with cut pavers.

Leave a Reply

Your email address will not be published. Required fields are marked *